English | 9Sound Enhancer ControlAdjusts each function of Sound effect individually.1 Enter the Sound Effect Control modePress the [SE] button for at least 1 second.“SE CTRL” is displayed.2 Select the Sound effect item for adjustmentPush the Control knob towards right or left.3 Adjust the Sound effect itemPush the Control knob towards up or down.Adjustment Item Display RangeBass setting “Bas” Off/Low/HighLV setting “LV” Off/Low/High4 Exit the Sound Effect Control modePress the [SE] button.⁄• Bass: Assisting the playback for the super bass sound.• LV: Adjusts the sound image by changing the verticalposition of the speakers virtually and increases ordecreases the soundscape.Illumination Color SelectSelect the illumination color for display, buttonsand control knob.1 Enter the Illumination color Select modePress the [COL] button.“Color” is displayed.2 Select the setting itemPush the Control knob towards right or left.Display Setting item“All” Sets the same color for all of items.“Display” Sets the display color.“Key” Sets the button color.“Rotary” Sets the control knob color.3 Change the colorTurn the Control knob.Color setting DisplayScan of Color 1-10 ”V.Scan”Color 1 ”Color 1”Color 2 ”Color 2”……Color 10 ”Color 10”User color ”User”4 Exit the Illumination color Select modePress the [COL] button.⁄• You can adjust the illumination color to your taste usingRGB setting. See (page10) for detail.• When illumination effect (I-EFCT) setting (page 14) is “2“,you can not set color.• When illumination effect (I-EFCT) setting (page 14) is “3“,you can select “ALL“ and set “color1” to “10”.Spectrum Analyzer SelectSelecting the Spectrum Analyzer display.Spectrum Analyzer DisplayScan of Spectrum Analyzer “S.A Scan“Peak Hold “PeakHold“Spectrum Analyzer 1 “Flash“Spectrum Analyzer 2 “Meter“Spectrum Analyzer 3 “Gravity“Spectrum Analyzer 4 “Tension“Spectrum Analyzer 5 “Hana-Bi“Spectrum Analyzer 6 “Laser”Spectrum Analyzer 7 “Dance“Spectrum Analyzer 8 “Warp“Spectrum Analyzer 9 “Jump“Spectrum Analyzer off “S.A Off“1 Enter the Spectrum Analyzer Select modePress the [COL] button for at least 1 second.“SPEANA” is displayed.2 Select the Spectrum AnalyzerTurn the Control knob.3 Exit the Spectrum Analyzer Select modePress the [COL] button.⁄• Scan of Spectrum Analyzer:The items from “PeakHold” to “Jump” are displayed insequence.