38 | EnglishConnecting Wires to TerminalsAUX INSUBWOOFER–+P.CONTMUTEANT. CONTILLUMIFRONT LFRONT RREAR LREAR REXT. CONTFM/AMantenna inputFront left output (White)Front right output (Red)Fuse (10A)To Kenwood disc changer/External optional accessoryWiring harness(Accessory1)White/BlackGray/BlackGreen/BlackPurple/BlackWhiteGrayGreenPurpleTo front leftspeakerTo front rightspeakerTo rear rightspeakerTo rear leftspeakerIgnition wire (Red)Battery wire (Yellow)Ground wire (Black) - (To car chassis)Ignition keyswitchCar fuse box(Main fuse)ACCCar fuse boxIf no connections are made, do not let the wire come out from the tab.To connect these leads, refer to therelevant instruction manuals.Power control wire (Blue/White)Motor antenna control wire (Blue)Dimmer control wire (Orange / White)When using the optional power amplifier, connectto its power control terminal.To car light control switchDepending on what antenna you are using,connect either to the control terminal of themotor antenna, or to the power terminal for thebooster amplifier of the film-type antenna.Sub Woofer left output (White)Sub Woofer right output (Red)TEL mute wire (Brown) Connect to the terminal that is grounded wheneither the telephone rings or during conversation.To connect the Kenwood navigationsystem, consult your navigation manual.AUX left input (White)AUX right input (Red)Rear left output (White)Rear right output (Red)External amplifier control wire(Pink/Black) To "EXT.AMP.CONT." terminal of the amplifierhaving the external amp control function.