Kenwood FreeTalk UBZ-GR14 Instruction Manual

Also see for FreeTalk UBZ-GR14: Instruction manual

Contents

7ENGLISHFRS MODE1 S ELECTING A C HANNEL1 Press the MODE key momentarily.• The FRS and CH icons blink.2 Press the s or t key to increase or decrease thechannel number.• Press and hold the s or t key to continuously increase ordecrease the channel number until you release the key.3 Once you have selected your desired channel number(1 ~ 14), press the PTT switch to complete the selectionand return to normal operation.2 L ISTENING FOR A C ALL1 If a calling party first presses their M key to alert you thatthey are going to speak, you will hear a 2 second ringingtone.2 You will hear audio from the speaker. Readjust thevolume if necessary.• The reception indicator appears while you are receiving.3 When the party has finished speaking, you can respondto the call (refer to “3 M AKING A C ALL” on page 8).This transceiver has a feature that allows you to ignoreunwanted calls. To ignore unwanted calls, you can set up acode on your selected channel. However, you must ensurethat each member of your group is using the same code,otherwise you will be unable to communicate with eachother. If you set the code on your selected channel to “OF”(off), you will hear calls from everyone within range who isusing the same channel you have selected.UBZ-GR14 E 1-20 01.4.12, 9:35 AM7