Kenwood FreeTalk UBZ-GR14 Instruction Manual

Also see for FreeTalk UBZ-GR14: Instruction manual

Contents

4 ENGLISHI NSTALLING / R EMOVING THE B ELT H OOK1 Align the belt hook tabs with the guides on the rear of thetransceiver.2 Slide the belt hook down the guides until it locks in place.3 To remove the belt hook, pull back on the lever on the topof the belt hook and slide the belt hook out of the guides.I NSTALLING / R EMOVING THE S TEREO H EADPHONESNote: Always switch OFF the transceiver power when installing orremoving the headphones.1 Open the SP tab on thetop of the transceiver.2 Insert the headphoneplug into the SP jack.3 When you remove thehead-phones from thetransceiver, be sure tocover the SP jack withthe attached tab inorder to keep dust anddirt away from the contacts.UBZ-GR14 E 1-20 01.4.12, 9:35 AM4