Kenwood FreeTalk UBZ-GR14 Instruction Manual

Also see for FreeTalk UBZ-GR14: Instruction manual

Contents

8 ENGLISH1 Press the MODE key momentarily, two times.• The FRS and SUB icons blink.2 Press the s or t key to increase or decrease the codenumber of the selected channel.• Press and hold the s or t key to continuously increase ordecrease the code number until you release the key.3 Once you have selected your desired code number(01 ~ 38 or OF), press the PTT switch to complete theselection and return to normal operation.4 Make sure your other party members are using the samecode that you have set up.• If each party member is using a different code, you will notbe able to hear each other’s calls.3 M AKING A C ALL1 When you want to make a call on your selected channel,first press the M key to alert the other party that you areabout to make a call.• The transmission indicator and CALL icon appear.• This step is not necessary when you are responding to acall, as the other party is already expecting a response.2 Press and hold the PTT switch, hold the transceiverabout 3 inches (7 1/2 cm) from your mouth, then speakinto the microphone using your normal voice.• The transmission indicator appears while you aretransmitting.3 When you finish speaking, release the PTT switch.Note: If you do not release the PTT switch after you finish talking, youwill not be able to receive any calls. Additionally, pressing the PTTswitch for extended periods will reduce the battery power.UBZ-GR14 E 1-20 01.4.12, 9:35 AM8