Kenwood K30CSS13 Instruction Manual

Kenwood K30CSS13 Instruction Manual Manual pdf 19 page image

19clock settingWhen the microwave is connected to the mains power, the LED display will show “0:00”, and themicrowave will sound once. Please ensure that you have set the clock prior to use.Please follow the steps below to set the clock.1. Press the Clock/Kitchen Timer button once. “00:00” will bedisplayed on the LED panel.2. Turn the Timer/Weight/Auto Menu dial to set the hour. Thehour input should be within 0-23 hours.3. Press the Clock/Kitchen Timer button to confirm the hour.The minute digits will also begin flashing.4. Turn the Timer/Weight/Auto Menu dial to set the minutes.The minutes input should be within 0-59 minutes.5. Press the Clock/Kitchen Timer button to confirm theminutes.6. “:” will flash.• This is a 24-hour clock. When the microwave isconnected to the mains power for the first time, orwhen the power resumes after a power interruption, theLED display will show “0:00”. To re-set the clock, followthe above 6 steps.• While setting the clock, if you press the Stop/Clearbutton, or if there is no operation within 5 minutes,the microwave will return to its previous statusautomatically.• To find out the current time while the microwave isin use, press the Clock/Kitchen Timer button. It willdisplay the current time for 2-3 seconds, then return tothe remaining cooking time.MicrowaveGrill/Combi.ConvectionW.T./TimeDefrostClock/Kitchen TimerStop/ClearStart/+30Sec./ConfirmTimer•Weight•AutoMenu2, 41, 3, 5K30CSS13_IB_RC_131126_Zell.indd 19 26/11/13 2:35 PM