Kenwood KA-V6000 Instruction Manual

On-screen character displayeee22TUNERREC QUT VIDEO |SOURCE --» VIDEO |DOLBY PRO LOGIC MODE{NORMALJDELAY TIME 19. Smsa eeDOLBY PRO LOGIC NORMALZZ - 1448TEST-06dB -06d8a (REAR) =DOLBY PRO LOGIC PHANTOMUe UeTEST~06d8 5 ~064Ba {REAR } |_|KA-V6000 (En)@ INPUT display@ VIDEO 1 REC OUTdisplay@ Surround modedisplay@ Delay time display© Rear level displayIn NORMAL and WIDEmodes of Dolby Pro LogicIn PHANTOMmode1. Input mode displays@ The source selected with the SELECTOR switch isdisplayed.® lf no other video signal is input to the monitor TV, itsscreen background becomes:Audio input > Green backgroundVideo input > Blue background@ The source being output at the VIDEO 1 REC jack isdisplayed.© If no other video signal is input to the monitor TV, itsscreen background becomes pink.2. Surround displays@ The Surround mode selected by the SURROUNDmode key is displayed.@) The delay time is displayed in 1.5 ms steps.@® The rear level and the balance of the Surround modeare displayed.@ The CENTER level is displayed in the NORMAL andWIDE modes of Dolby Pro Logic.3. Test tone displayIn the Test mode of Dolby Pro Logic, the positions of thespeakers through which the test tone is output aredisplayed.L ‘Left (Front)& :Center (Front)R ‘Right (Front)REAR :Surround (Rear)L/R ‘Left/Right (Front)REAR :Surround (Rear)