Kenwood KA-V6000 Instruction Manual

PHONO=OGND TAPE 2“OO SWve0:=8ePLAY rTUNER ©©©© =eco“ADAPT OR sue ©) ©)©© (0000Ano CENTEROUT SUBlwoOFER ae PRE QUTMONITOR OUT jackMONITOR OUT S-VIDEO jackS-VIDEO ViOEO L AUDIO R© ©OQOAV/AUX jackoevl| AUDIO, L/R|@ Connection of monitor TVConnect the video input jack of the monitor TV to theMONITOR OUT jack on the rear panel using a videoconnection cord.lf the monitor TV is equipped with an S-VIDEO inputjack,connect it to the S-VIDEO jack of this unit.Notes:1. If the connection is made via the S-VIDEO jack, the featuresincluding the on-screen display is defeated.2. Some TV accepts the S-VIDEO input in priority over thecomposite video input in case connection is made on both theS-VIDEO and composite VIDEO jacks. If on-screen display isrequired with such a TV with such a connection, disconnectits S-VIDEO jack.3. When a video signal is input to this unit through the compositeVIDEO jack, the same signal is not output from the S-VIDEOjack of the MONITOR OUT jacks.4. When a video signal is input to this unit through the S-VIDEOjack, the same signal is not output from the MONITOR OUTvideo jack.@ Caution concerning connection to videodecksThe VIDEO 2 and VIDEO 3 inputs/outputs can be con-nected through the S-VIDEO jacks. Use an S-VIDEO cablewhen connecting to an S-VIDEO Jack.M@ Note concerning connection to video discplayersA video disc player can also be connected through anS-VIDEO jack. Use an S-VIDEO cable when connecting toan S-VIDEO jack.@ AV AUX jacks@The AV AUX jacks on the front panel include anS-VIDEO jack, allowing connection to be made using anS-VIDEO cable.KA-V6000 {En) 9