Kenwood KAF-1010 Instruction Manual

Also see for KAF-1010: Service manual

Contents

2KAF-3010R/1010 (En)Before applying powerUnits are designed for operation as follows.Europe and U.K. ..................................................................... AC 230 V only*Other countries ............................. AC 110-120 /220-240 V switchableFor the United KingdomFactory fitted moulded mains plug1. The mains plug contains a fuse. For replacement, use only a13-Amp ASTA-approved (BS1362) fuse.2. The fuse cover must be refitted when replacing the fuse inthe moulded plug.3. Do not cut off the mains plug from this equipment. If the plugfitted is not suitable for the power points in your home or thecable is too short to reach a power point, then obtain anappropriate safety approved extension lead or adapter, orconsult your dealer.If nonetheless the mains plug is cut off, remove the fuse anddispose of the plug immediately, to avoid a possible shockhazard by inadvertent connection to the mains supply.IMPORTANTThe wires in the mains lead are coloured in accordancewith the following code.Blue : NeutralBrown : LiveDo not connect those leads to the earth terminal of athree-pin plug.Safety precautionsCAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENWARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAINOR MOISTURE.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TOQUALIFIED SERVICE PERSONNEL.THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, ISINTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE”WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTEA RISK OF ELECTRIC SHOCK TO PERSONS.THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USERTO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONSIN THE LITERATURE ACCOMPANYING THE APPLIANCE.UnpackingUnpack the unit carefully and make sure that all accessories are put aside so they will not be lost.Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unitwas shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can filea claim against the carrier for shipping damage.We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.Caution : Read this page carefully to ensure safe operation.*For other countriesThis unit operates on 110-120 or 220-240 volts AC . The AC voltageselector switch on the rear panel is set to the voltage that prevails inthe area to which the unit is shipped. Before connecting the powercord to your AC outlet, make sure that the setting position of thisswitch matches your line voltage. If not, it must be set to your voltagein accordance with the following direction.AC voltage selectionAC voltage selector switchMove switch lever to matchyour line voltage with a smallscrewdriver or other pointedtool.Note:Our warranty does not cover damage caused by excessive line voltagedue to improper setting of the AC voltage selector switch.AC 220—240VAC 110—120V