Kenwood KAF-1010 Instruction Manual

Also see for KAF-1010: Service manual

Contents

6KAF-3010R/1010 (En)ƒSL 16 XS-8+ – – +PHONO CD TUNER TAPESYSTEM CONTROLSPEAKERSiA or B : 4–16Ω, A and B : 8–16ΩjREC PLAY REC PLAYMDSIGNAL GNDLRR LR LBAConnect the speakers as shown below, ensuring that bare wires do not make contact with other terminals.Speaker impedanceWhen only one pair of speakers is connected to A or B speaker terminals, use the speakers having an impedance of 4 to16 Ω.When two pairs of speakers are connected to both A and B terminals simultaneously, use the speakers having animpedance of 8 to 16 Ω. In this case, connecting a speaker having an impedance of less than 8 Ω may cause malfunctionof the amplifier.1 Strip coating.3 Insert.2 Loosen.4 Secure.Speaker system B• Never short-circuit the + and – speaker cords.• If the left and right speakers are connected inversely or if thespeaker cords are connected with reversed polarity, the soundbecomes unnatural with ambiguous acoustic image positioning.Be sure to connect the speakers and speaker cords correctly.1 Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging / unplug-ging connection cords without removal of the power cord can cause malfunctions or damage to the unit.3 Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit.Speaker system ARIGHTRIGHTLEFTLEFT·ª · ª·ª · ªNotesNotesConnection of speakers