Kenwood KAF-1010 Instruction Manual

Also see for KAF-1010: Service manual

Contents

7KAF-3010R/1010 (En)Main unitControls and indicatorsAbout the standby indicator (KAF-3010R only)This unit has a standby indicator that lights to show that a small amount of current is being supplied to the unit in order to preserve thememory. This is called the Standby mode. When the Standby indicator is lit, the amplifier can be switched ON / STANDBY from the remotecontrol.1 POWER switch (KAF-3010R) 0Usually leave this switch to the on position.When the unit is not to be used for a long period of time, setthe switch to the OFF position for safety.2 ON/STANDBY key (KAF-3010R) 0This key effective when the POWER key is setto the on (standby) position, and pressing this keyturns power ON and off (standby).3 Standby indicator (KAF-3010R)4 POWER switch (KAF-1010) 05 BASS knob !To adjust low frequencies.6 TREBLE knob !To adjust high frequencies.7 INPUT indicator 0An indicator lights for the source selectedwith the INPUT SELECTOR knob.8 VOLUME CONTROL knob 0Adjust the volume.9 SOURCE DIRECT indicator @0 SOURCE DIRECT key @To listen to a source with high quality sound.! PHONES jack @Used for headphone listening.@ SPEAKERS A/B switches 0Press to select the A and/or B speaker systems.# BALANCE knob !Adjust the volume balance between left and right.$ INPUT SELECTOR knob 0Turn to select the input sources.% MUTING key/indicator !Mute the sound temporarily.^ LOUDNESS key/indicator !Use to emphasize deep bass sounds.& Remote sensor (KAF-3010R only) 9PHONES A SPEAKER B BASS TREBLE BALANCEINPUT SELECTORMUTING LOUDNESSON OFFPOWERON/STANDBYMIN MAXVOLUME CONTROLMDTAPETUNERPHONOCDSOURCE DIRECTthermally reactive advanced instantaneous transistor T R A I TL R31 42 5 6 7 8 9 0&^%$#@!ON OFFON OFFPOWERPOWERON/STANDBYKAF-3010R KAF-1010