12 | KCA-BT200Registering Bluetooth deviceTo make your Bluetooth device (cell-phone or audioplayer) usable with this unit, you need to registerit (pairing). You can register up to five Bluetoothdevices to this unit.When registering from Bluetooth devices1 Turn on the control unit.2 Start registering a unit by operating theBluetooth device.By operating the Bluetooth device, register thehands-free unit or audio player (pairing). Select"KCA-BT200" from the list of connected units.3 Enter a PIN codeModel-A, B, C:Input the PIN code registered as mentioned in (page 13).Model-D, E, F:Enter "0000" as a PIN code.Check that registration is complete on theBluetooth device.4 By operating the Bluetooth device, start hands-free or audio connection.When registering from this unit (Function ofModel-A/ Model-B/ Model-C)1 Select the Bluetooth Device registration modeSelect the "Device Regist"/ "DVS REGIST"/ "DVSREG"/ "DVC REG" display.2 Press the [38] button (Control knob) for atleast 1 second.Search for the Bluetooth device.When search is completed, "Finished" is displayed.3 Select the Bluetooth DevicePush the Control knob upward or downward toselect the Bluetooth device.Press the [38] button (Control knob) todetermine the selection.4 Input the PIN codeOperation type OperationSelect the numbers. Push the Control knob towards up or down.Move to the next digit. Push the Control knob towards left.Delete the last digit. Push the Control knob towards right.5 Transmit the PIN codePress the Control knob for at least 1 second.If "Pairing Success"/"PAIRING OK"/"PAIR OK" isdisplayed, registration is completed.6 Return to the device listModel-A, C:Press the [38] button (Control knob).Model-B:Press the [FNC] button.7 End device registrationExit Menu mode.⁄• You can also register from the Bluetooth device side. Forthe PIN code necessary for registration, see PIN Code> (page 12).• This unit allows up to eight digits to be input for a PINcode. If a PIN code cannot be input from this unit, it canbe input from the Bluetooth device.• If there are 5 or more Bluetooth devices registered, youcannot register a new Bluetooth device.• If the error message appears even though the PIN codeis correct, try (page 12).• For how to operate the Bluetooth device, refer to theInstruction Manual that comes with your Bluetoothdevice.Function OperationFunction of Model-A/ Model-B/ Model-CRegistering Special Bluetooth deviceAllow registration of a special device that cannot beregistered normally (pairing).1 Select the special device registration modeSelect the "SPCL DVC Select"/"S-DVC SELECT"/"SDVC SEL" display.2Model-A, B:Press the [38] button (Control knob) for atleast 1 second.Model-C:Press the Control knob for at least 1 second.3 Select a device namePush the Control knob upward or downward toselect a device name.Press the [38] button (Control knob) todetermine the selection.If "Completed"/"Complete" is displayed, registrationof the special device is completed.4 Go through the procedure of Bluetooth device> (page 12) and complete theregistration (pairing).