Kenwood KCA-BT200 Instruction Manual

Also see for KCA-BT200: Training guide Product information Instruction manual Instruction manual

English | 13Downloading the Phone BookDownload the phone book data from the cell-phone to this unit so that you can use the PhoneBook of this unit.To download automaticallyIf the cell-phone supports a phone booksynchronization function, the phone book isdownloaded automatically after Bluetoothconnection.☞ Setting on the cell-phone may be required.☞ If no phone book data is found in the unit even afterthe compete display, your cell-phone may not supportautomatic download of phone book data. In this case,try downloading manually.To download from the cell-phone manually1 By operating the cell-phone, end the hands-freeconnection.2 By operating the cell-phone, send the phonebook data to this unitBy operating the cell-phone, download the phonebook data to this unit.During downloading:"Downloading", "DOWNLOAD", or "NowDownloading…" is displayed.After completion of downloading (Model-A,B, C, D):"Completed" or "COMPLETE" is displayed.3 By operating the cell-phone, start the hands-free connection.To clear the downloading completionmessage (Model-A, B, C, D):Press any button.⁄• For how to operate the cell-phone, refer to theInstruction Manual that comes with your cell-phone.• Up to 1000 phone numbers can be registered for eachregistered cell-phone.• Up to 32 digits can be registered for each phone numberalong with up to 50* characters representing a name.(* 50: Number of alphabetic alphabetical characters.Fewer characters can be input depending on the typeof characters.)• To cancel downloading of the phone book data, operatethe cell-phone.⁄• If the device name is not in the list, select "Other Phone".Function of Model-A/ Model-B/ Model-CRegistering PIN CodeBy operating the Bluetooth device, specify the PINcode necessary for registering this unit.1 Select the PIN code edit modSelect the "PIN Code Edit"/ "PIN EDIT" display.2Model-A, B:Press the [38] button (Control knob) for atleast 1 second.Model-C:Press the Control knob for at least 1 second.3 Input the PIN codeOperation type OperationSelect the numbers. Push the Control knob towards up or down.Move to the next digit. Push the Control knob towards left.Delete the last digit. Push the Control knob towards right.4 Register a PIN codeModel-A, B:Press the [38] button (Control knob) for atleast 1 second.Model-C:Press the Control knob for at least 1 second.If "Completed"/"Complete" is displayed, registrationis completed.⁄• By default, "0000" is specified.• A PIN code can be specified with up to eight digits.