Kenwood KCA-BT200 Instruction Manual

Also see for KCA-BT200: Training guide Product information Instruction manual Instruction manual

English | 27SpecificationsBluetooth sectionTechnology: Bluetooth 1.2 CertifiedFrequency: 2.402 – 2.480 GHzOutput Power: +4dBm (MAX), 0dBm (AVE) Power Class 2Maximum Communication range: Line of sight approx.10m (32.1 ft)Profiles: HFP (Hands Free Profile): HSP (Headset Profile): OPP (Object Push Profile): PBAP (Phonebook Access Profile): SYNC (Synchronization Profile): SPP (Serial Port Profile): A2DP (Advanced Audio Distribution Profile): AVRCP (Audio/Video Remote Control Profile)GeneralOperating voltage (10.5 – 16V allowable): 14.4 VCurrent consumption: 200 mADimension (W x H x D): 95 x 30 x 105 mm3-3/4 x 1-3/16 x 4-1/8 inchWeight: 0.37 kg (0.82 lbs)Specifications subject to change without notice.No Data/ NO DATA :• There is no outgoing call list.• There is no incoming call list.No Entry/ NO ENTRY :The cell-phone has not been registered(pairing).HF Disconnect/ HF DISCONCT/ HF D-CON/ Disconnect/DISCONCT/ Non Connection/ Disconnected :The unit cannot communicate with the cell-phone.Audio Disconnect/ AUD DISCONCT/ AD D-CON :The unit cannot communicate with the audioplayer.HF Connect/ HF CONNECT/ Connect/ CONNECT :The unit can communicate with the cell-phone.HF Error 07/ HF ERR07:The memory cannot be accessed.\ Turn off the power and on again. If thismessage still appears, press the resetbutton on the control unit.HF Error 68/ HF ERR68:The unit cannot communicate with the cell-phone.\ Turn off the power and on again. If thismessage still appears, press the resetbutton on the control unit.Unknown: The Bluetooth device cannot be detected.Device Full/ DVC FULL:5 Bluetooth device have already beenregistered. No more Bluetooth device cannotbe registered.PIN Code NG/ CODE NG:The PIN code is wrong.Connect NG/ CONCT NG:The unit cannot be connected to the device.Pairing Failed/ PAIRING NG/ PAIR NG:Pairing error.Err No Matching/ NO MATCHING/ NO MATCH:The voice tag is wrong. Voice cannot berecognized because of an unregistered voicetag, etc.Too Soft: Voice is too small and cannot be recognized.Too Loud: Voice is too large to be recognized.Too Long: The word or utterance is too long to berecognized.No Phonebook/ NO PB:Data is not contained in the phone book.No Message/ NO SMS:No short message in In Box.