Kenwood KDC-232MR Instruction Manual

Also see for KDC-232MR: Training guide Instruction manual Instruction manual Service manual

Kenwood KDC-232MR Instruction Manual Manual pdf 10 page image

10 | EnglishGeneral featuresSpeaker SettingFine-tuning so that the System Q value is optimalwhen setting the speaker type.1 Enter StandbyPress the [SRC] button.Select the "STANDBY" display.2 Enter Speaker Setting modePress the [VOL] knob.3 Select the Speaker typeTurn the [VOL] knob.Each time you turn the knob, the settingalternates between the settings shown in thetable below.Speaker type DisplayOFF "SP OFF"For 5 & 4 in. speaker "SP 5/4"For 6 & 6x9 in. speaker "SP 6*9/6"For the OEM speaker "SP OEM"4 Exit Speaker Setting modePress the [VOL] knob.Switching DisplayChanging the information displayed.1 Enter Switching Display modePress the Control knob for at least 1 second."DISP SEL" is displayed.2 Select the Display itemPush the Control knob towards [4] or[¢].In Tuner sourceInformation DisplayFrequency "FREQ"Clock "CLOCK"In CD & External disc sourceInformation DisplayDisc title (In External disc source or KDC-MP2032/MP2032CR/MP232/MP202internal CD source)"D-TITLE"*Track title (In External disc source or KDC-MP2032/MP2032CR/MP232/MP202internal CD source)"T-TITLE"*Track number & Play time "P-TIME"Clock "CLOCK"In Audio file sourceInformation DisplaySong title & Artist name "TITLE"*Album name & Artist name "ALBUM"*Folder name "FOLDER"File name "FILE"Track number & Play time "P-TIME"Clock "CLOCK"In HD Radio sourceInformation DisplayStation name "ST NAME"*Song title/ Artist name/Album name/ Genre"TITLE"*Frequency "FREQ"Clock "CLOCK"In Standby/ Auxiliary input sourceInformation DisplaySource name "SRC NAME"Clock "CLOCK"3 Exit Switching Display modePress the Control knob.• * If the contents of the information cannot bedisplayed, Play time or Frequency is displayed.• Album name cannot be displayed in WMA file.