Kenwood KDC-5023 Instruction Manual

Also see for KDC-5023: Service manual

Kenwood KDC-5023 Instruction Manual Manual pdf 14 page image

Putting the station in the memory.1 Select the bandPress the [FM] or [AM] button.2 Select the frequency to put in the memoryPress the [4] or [¢] button.3 Put the frequency in the memoryPress the desired [1] — [6] button for at least 2 seconds.The preset number display blinks 1 time.On each band, 1 station can be put in the memory on each [1] —[6] button.Station Preset MemoryEntering the frequency and tuning.1 Select the bandPress the [FM] or [AM] button.2 Enter Direct Access Tuning modePress the [DIRECT] button on the remote."– – – –" is displayed.3 Enter the frequencyPress the number buttons on the remote.Example:Desired frequency Press button92.1 MHz (FM) [0], [9], [2], [1]810 kHz (AM) [0], [8], [1], [0]Canceling Direct Access TuningPress the [DIRECT] button on the remote.Direct Access Tuning (Function of remote)Selecting the station.1 Select tuner sourcePress the [SRC] button.Select the "TUNER" display.2 Select the bandPress the [FM] or [AM] button.Each time the [FM] button is pressed it switches between theFM1, FM2, and FM3 bands.3 Tune up or down bandPress the [4] or [¢] button.During reception of stereo stations the "ST" indicator is ON.TuningFunction of the KDC-MPV7023/KDC-6023/KDC-5023Choose the tuning mode.Press the [AUTO] button.Each time the button is pressed the Tuning mode switches asshown below.Tuning mode Display OperationAuto seek "Auto 1"/" Automatic search for a station."AUTO 1Preset station "Auto 2"/ Search in order of the stationsseek "AUTO 2" in the Preset memory.Manual "Manual"/ Normal manual tuning control."MANUAL"Tuning ModeTuner features— 14 —English