Kenwood KDC-5023 Instruction Manual

Also see for KDC-5023: Service manual

Kenwood KDC-5023 Instruction Manual Manual pdf 15 page image

Function of the KDC-MPV7023/KDC-6023/KDC-5023Changing the tuning frequency step.The original setting is FM band 50 kHz, and AM band 9 kHz.While pressing the [1] and [5] button, press the Reset button.The frequency step changes to FM band 200 kHz, and AM band10 kHz.• When the same operation is repeated, it returns to the originalsetting.• When the frequency step is switched, the frequencies in thememory are deleted.Frequency Step SettingCalling up the stations in the memory.1 Select the bandPress the [FM] or [AM] button.2 Call up the stationPress the desired [1] — [6] button.Preset TuningKDC-5023R:• When the (page 29) is ON, only RDSstations are put in the memory.• When Auto Memory Entry is done in the FM2 band, the RDSstations preset in the FM1 band aren't put in the memory.Likewise, when it is done in the FM3 band, RDS stations preset inFM1 or FM2 aren't put in the memory.Function of the KDC-MPV7023/KDC-6023/KDC-5023RPutting a station with good reception in the memoryautomatically.1 Select the band for Auto Memory EntryPress the [FM] or [AM] button.2 Enter Menu modePress the [MENU] button for at least 1 second."MENU" is displayed.3 Select the Auto Memory Entry modePress the [FM] or [AM] button.Select the "Auto-Memory"/ "A-MEMORY" display.4 Open Auto Memory EntryPress the [4] or [¢] button for at least 2 seconds.When 6 stations that can be received are put in the memoryAuto Memory Entry closes.Auto Memory EntryFunction of the KDC-5023Putting stations with good reception in the memoryautomatically.1 Select the band for Auto Memory EntryPress the [FM] or [AM] button.2 Open Auto Memory EntryPress the [AME] button for at least 2 seconds.When 6 stations that can be received are put in the memoryAuto Memory Entry closes.Auto Memory Entry— 15 —