Kenwood KDC-5023 Instruction Manual

Also see for KDC-5023: Service manual

Kenwood KDC-5023 Instruction Manual Manual pdf 34 page image

English— 34 —Connecting Wires to Terminals (KDC-MPV7023/6023/5023)ANT.CONTP.CONTFRONT • LFRONT • RREAR • LREAR • R –+FRONTAUX INFM/AM antenna input 1KDC-MPV7020Fuse (10A) 242 KENWOOD disc changer control inputWiring harness(Accessory1)2529White/Black32Gray/Black35Green/Black38Purple/BlackWhite31Gray34Green37Purple40To front leftspeaker 30To front rightspeaker 33To rear rightspeaker 39To rear leftspeaker 36Ignition wire (Red) 20Battery wire (Yellow) 21Ground wire (Black) · (To car chassis) 22Ignition keyswitch10Car fuse box(Main fuse)11ACC 13Car fusebox 14Battery12If no connections are made, do not let the wire come out from the tab.To connect the Disc changer, consultyour Disc changer manual. 3Power control wire (Blue/White) 15Motor antenna control wire (Blue)17Dimmer control wire (Orange / White)(KDC-MPV7023/6023 only) 185 When using the optional power amplifier,connect to its power control terminal.To car light control switch87 Depending on what antenna you are using,connect either to the control terminal of themotor antenna, or to the power terminal forthe booster amplifier of the film-type antenna.AUX left input (White)(KDC-MPV7023/6023 only)AUX right input (Red)(KDC-MPV7023/6023 only)Front left output (White) 23(KDC-MPV7023/6023 only)Front right output (Red) 28(KDC-MPV7023/6023 only)Rear left output (White)/ Non-fading left output (KDC-MPV7023/6023 only) (White) 26Rear right output (Red)/ Non-fading right output (KDC-MPV7023/6023 only) (Red) 274a