Function of the KDC-6090RYou can turn the non-fading output on and off whilst thepreout is switched to the non-fading preout.Turning non-fading output On/Off :Hold down the NF button for one second or more to set thefunction ON or OFF."NF ON" is displayed when the non-fading output is set ON.Non-Fading OutputPress the Q button to enter the speaker setting mode.Press either the 4 or ¢ button to select the type ofspeaker. The setting switches as follows.Off ("SP OFF") / For 6/6x9 in. speaker ("SP 6*9/6inch") /For 5/4 in. speaker ("SP 5/4inch") /For the OEM speaker ("SP O.E.M.")Press the Q button to end the speaker setting mode.Speaker setting function allows for tuning of bass, middle andtrebleNOTE432This function allows you to adjust the setting that is recalledwith the System Q, according to types of speakers.Press the SRC button repeatedly to select the standby mode."ALL OFF" is displayed when the standby mode is selected.1Speaker SettingYou can recall the best audio setting preset for different typesof the music.Switching the Preset Sound Setting:Each time you press the Q button, the preset sound settingswitches as follows:As you proceed, each indicator would go on.The System Q function changes the values of the followingsound quality parameters:Bass centre frequency, bass level, bass quality factor, bassextend, middle centre frequency, middle level, middle qualityfactor, treble centre frequency, treble level non-fading level, high-pass filter frequency for front output, high-pass filter frequencyfor rear output, and low-pass filter frequency for non-fadingoutput.Their setting values are different depending on the setting of thespeaker setting mode.NOTEFlatEasyRockJazzPopsTop 40Scan of Flat – Easy(Default setting)User memory**User memory:The unit returns to the stateadjusted the last time withthe audio control setting feature.System QGeneral features— 12 —English