Kenwood KDC-6090R Instruction Manual

Kenwood KDC-6090R Instruction Manual Manual pdf 16 page image

You can change the display used when listening to the radio.Switching the Display:Each time you press the DISP button, the display changes asfollows:Displaying Frequencies during programme service namedisplay:Hold down the DISP button for one second or more.The frequency for the RDS station will be displayed for fiveseconds instead of the station name.If the RDS station currently tuned to is transmitting no text whilstthe Radio Text Display mode is turned on, "NO TEXT" will appearin the display. Whilst awaiting reception, "Waiting" will bedisplayed.NOTEProgramme Service name (only during RDS station reception)/Station frequencyRadio text (only during RDS station reception)Switching Display for TunerSelect the band/station that you want to have stored.Hold down the button (#1-6) that you want to use for thestation, for two seconds or more.The button number blinks once in the display to indicate thatthe data has been stored.Recalling a Preset Station:Press the preset station button (#1-6) for the desired station.The number of the recalled station is displayed.You can store 6 stations in each of the FM1, FM2, FM3, and AM(MW and LW) bands.NOTE21Store the frequency of the station currently being listened to.You can then recall that station with a single touch of a button.Station Preset MemoryPress the SRC button repeatedly until the tuner mode isobtained. "TUNER" is displayed only when the tuner mode isselected.Press either the FM or AM button to select the band.Each time you press the FM button, the band switchesbetween the FM1, FM2 and FM3.Press the AM button to select the MW and LW bands.• Auto Seek TuningPress the ¢ button to seek increasing frequencies.Press the 4 button to seek decreasing frequencies.• Preset station seek tuningPress the ¢ button to move to the next preset station (i.e.,the one with the next highest number), and the 4 button tomove to the last preset station (i.e., the one with the nextlowest number).If the frequencies stored at the preset numbers receivestations which were not originally memorized when travellinglong distances, the preset number is not displayed. In suchcases, pressing the 4/¢ button to use preset stationseek will receive channel 1.• Manual TuningPress the ¢ button to increase the frequency by one step.Press the 4 button to decrease the frequency by one step.• The ST indicator lights up when stereo broadcasts are beingreceived.• Please see the menu settings about selecting tuning mode.(page 33)NOTENOTE321TuningTuner features— 16 —English