Kenwood KDC-B7021 Instruction Manual

Also see for KDC-7021: Service manual

Scrolling the displayed CD text or MD title.Press the [DISP] button for at least 1 second.Text/Title Scroll7 Exit name set modePress the [NAME.S] button.• When operation stops for 10 seconds the name at that time isregistered, and Name Set mode closes.• Media that you can attach names to- Internal CD player: 30 discs.- External CD changer/ player: Varies according to the CD changer/player. Refer to the CD changer/ player manual.• The name of a CD can be changed by the same operation youused to name it.Attaching a title to a CD.1 Play the disc you want to attach a name to• A title can't be attached to a MD.• Disc Naming can't be done during CD text display.2 Enter name set modePress the [NAME.S] button for at least 2 seconds."NAME SET" is displayed.3 Move the cursor to the enter character positionPress the [4] or [¢] button.4 Select the character typePress the [38] button.Each time the button is pressed the character typed switches asshown below.Character typeAlphabet upper caseAlphabet lower caseNumbers and symbolsSpecial characters (Accent characters)5 Select the charactersPress the [FM] or [AM] button.Characters can be entered by using a remote with a number button.Example: If "DANCE" is entered.Character Button #Times pressed"D" [#3] 1"A" [#2] 1"N" [#6] 2"C" [#2] 3"E" [#3] 26 Repeat steps 3 through 5 and enter the name.Disc Naming (DNPS)CD/External disc control features— 20 —EnglishKDC-7021SE_U.S 03.1.17 2:56 PM Page 20