Kenwood KDC-B7021 Instruction Manual

Also see for KDC-7021: Service manual

Setting the graphic part display ON/OFF.Display Setting"Graphic ON" The graphic part is displayed."Graphic OFF" The graphic part isn't displayed.Switching Graphic DisplaySelecting the button illumination color as green or red.Display Setting"Button Green" The illumination color is green."Button Red" The illumination color is red.Selectable IlluminationSynchronizing the RDS station time data and this unit's clock.Display Setting"SYNC ON" Synchronizes the time."SYNC OFF" Adjust the time manually.It takes 3 to 4 minutes to synchronize the clock.Synchronize Clock4 Exit Clock adjustment modePress the [MENU] button.This adjustment can be done when the (page23) is set as OFF.1 Select Clock Adjustment modePress the [FM] or [AM] button.Select the "Clock Adjust" display.2 Enter Clock Adjust modePress the [4] or [¢] button for at least 1 second.The clock display blinks.3 Adjust the hoursPress the [FM] or [AM] button.Adjust the minutesPress the [4] or [¢] button.Manual Clock AdjustmentSetting the operation check sound (beep sound) ON/OFF.Display Setting"Beep ON" Beep is heard."Beep OFF" Beep canceled.Touch Sensor Tone1 Turn the power ONThe vehicle engine turns ON."TRANSMIT 1" is displayed.2 Enter the Mask Key's signalRepeat steps 4 and 5 abobe, and enter the Mask Key's signal."APPROVED" is displayed.The unit can be used.— 23 —KDC-7021SE_U.S 03.1.17 2:57 PM Page 23