— 31 —TEL MUTEEXT.CONT.P.CONT.OUTANT.CONT.1234567812345678REARFRONTFront left output (White) 14Front right output (Red) 13Rear right output (Red) 11Rear left output (White) 12Connector Function GuidePin Numbers forISO Connectors Cable Colour FunctionsExternal PowerConnectorA–4A–5A–6A–7A–8SpeakerConnectorB–1B–2B–3B–4B–5B–6B–7B–8YellowBlue/WhiteOrange/WhiteRedBlackPurplePurple/BlackGrayGray/BlackWhiteWhite/BlackGreenGreen/BlackBatteryPower ControlDimmerIgnition (ACC)Earth (Ground)ConnectionRear Right (+)Rear Right (–)Front Right (+)Front Right (–)Front Left ( +)Front Left ( –)Rear Left (+)Rear Left (–)Battery wire (Yellow) 6Ignition wire (Red) 7FM/AMantenna input2Antenna Cord (ISO) 3Antenna Conversion Adaptor (ISO–JASO) (Accessory3) 1Wiring harness(Accessory1)5Connect to the terminal that isgrounded when either the telephonerings or during conversation. 24Power control/ Motor antennacontrol wire (Blue/White) 22 Connect either to the power controlterminal when using the optionalpower amplifier, or to the antennacontrol terminal in the vehicle. 26A–7 Pin (Red) 8A–4 Pin (Yellow) 9Connector BFuse(10A)4Connector ATEL mute wire (Brown) 21To connect the KENWOODnavigation system, consult yournavigation manual. 25External amplifiercontrol wire(Pink / Black)20To "EXT.AMP.CONT." terminal of theamplifier having the external ampcontrol function. 23To KENWOOD disc changer/DAB control input/KPA-SD100/KPA-HD100/KPA-SS100 16To connect these leads, referto the relevant instructionmanuals. 17Connecting Cables to TerminalsIf no connectionsare made, do notlet the cable comeout from the tab. 27KDC-7021SE_U.S 03.1.17 2:57 PM Page 31