Kenwood KDC-BT47SD Instruction Manual

Contents

26 English English 27CONTENTSSMS (Short Message Service)Downloading the SMS1 Press to enter Bluetooth mode.2 Turn the volume knob to select[SETTINGS], then press to enter.3 Turn the volume knob to select [SMS],then press to enter.4 Turn the volume knob to select [SMSDOWNLOAD], then press to enter.5 Start downloading■■ During downloading: “DOWNLOADING”is displayed.■■ After completion of downloading:“COMPLETE” is displayed.6 Hold to finish the procedure.■■ To cancel the Bluetooth mode, press .■■ The cell-phone must be able to transmit theSMS using Bluetooth. Setting on the cell-phone may be required. If the cell-phonedoes not support an SMS function, theSMS download item is not displayed in theSettings mode.■■ When the SMS is downloaded from thecell-phone, the unopened messages in thecell-phone are opened.■■ Up to 149 already read and unread shortmessages can be downloaded.Display the SMS¤To prevent car accidents, the driver shouldnot read the SMS while driving.When a new message arrives“SMS RECEIVED” is displayed.Displaying the SMS1 Press to enter Bluetooth mode.2 Turn the volume knob to select [SMSINBOX], then press to enter.3 Turn the volume knob to select amessage.■■ Switches between name, phone numberand message reception date, press DISP.4 Press the volume knob to display thetext.■■ To scrolls the message, turn the volumeknob.■■ To return to the message list, press thevolume knob.5 Hold to finish the procedure.■■ To cancel the Bluetooth mode, press .■■ The unopened message is displayed at thebeginning of the list. Other messages aredisplayed in the order of reception.■■ The SMS that has arrived when the cell-phone is not linked with Bluetooth cannotbe displayed. You need to download it.■■ The short message cannot be displayedduring downloading.■■ Unread messages are prefixed with anasterisk (*).Return message setting1 Press to enter Bluetooth mode.2 Turn the volume knob to select[SETTINGS], then press to enter.3 Turn the volume knob to select [SMS],then press to enter.4 Turn the volume knob to select [SMSMESSAGE], then press to enter.5 Turn the volume knob to select amessage, then press to confirm.■■ When the [USER] is selected, a messageis displayed. Press the volume knob again.6 Hold to finish the procedure.Creating an original message1 Press to enter Bluetooth mode.2 Turn the volume knob to select[SETTINGS], then press to enter.3 Turn the volume knob to select [SMS],then press to enter.4 Turn the volume knob to select [SMSMESSAGE], then press to enter.5 Turn the volume knob to select [USER],then press and hold to enter.6 Turn the volume knob to select thecharacter.■■ To move to the column, press 4 / ¢.■■ To select the character type, press DISP.■■ To delete the character, press .■■ To delete the all characters, press andhold .■■ You can enter alphanumeric charactersusing the ten keys on the remotecontroller.■■ To select the Cyrillic characters, set[RUSSIAN SET] to [ON]. (page 7)7 Press the volume knob to confirm.8 Hold to finish the procedure.SMS Setup1 Press to enter Bluetooth mode.2 Turn the volume knob to select[SETTINGS], then press to enter.3 Turn the volume knob to select [SMS],then press to enter.4 Turn the volume knob to make aselection, then press to confirm.See table below for selection.5 Hold to finish the procedure.■■ To cancel the Bluetooth mode, press .Item Selectable setting (Preset: *)SMSSMSDOWNLOADDownload a short message. (For details, see page 26.)SMS REPLY AUTO * : Replies to the received SMS automatically. ; MANUAL : Sets whether to reply to the received SMS. ;OFF : Does not reply to the received SMS.SMS MESSAGE You can select a return message.■■ [SMS REPLY]:– When “AUTO” is selected, a reply is made only to the SMS from the phone whose phone number has been registered in thePhone Book. If an SMS is received from the phone whose phone number has not been registered in the Phone Book, you can replyto it in the same manner as you selected “MANUAL”.– When an SMS is received with “MANUAL” selected, “REPLY Y/ N” is displayed. Selecting “Y” sends the reply. Selecting “N” cancelsthe reply. Selecting “Y” allows you to select a message.– If sending of a reply message fails, “SEND ERROR” is displayed. While “RESEND Y/ N” is still displayed on the display, selecting “Y”resends the reply. Selecting “N” cancels the reply.