16 English English 17CONTENTSPARiPodVOICEPress and hold to pairing mode.Getting Started of BluetoothEasy Pairing function1 Press and hold to enter easy pairingmode“PAIRING” is displayed.■■ Any of the following is displayeddepending on Bluetooth deviceregistration condition:– “SEARCHING”: When registering aBluetooth device for the first time.– “(device name)”: When a Bluetoothdevice has already been registered.– “DEVICE FULL”: When a maximum of fiveBluetooth devices have already beenregistered.■■ To cancel the easy pairing mode, press .When registering a Bluetooth device for thefirst time (Registering a Bluetooth device)2 “SEARCHING” is displayed.Search for the Bluetooth device.When search is completed, “FINISHED” isdisplayed.3 Turn the volume knob to select aBluetooth device name, press to confirm.4 “CONFIRM DVC” is displayed.If “PAIRING OK” is displayed, proceed tostep 7.If “PIN CODE” is displayed, proceed to steps5.If “*** NG” is displayed, press the volumeknob. Proceed to steps 4.5 Input the PIN code■■ To select the number, turn the volumeknob.■■ To move to the next digit, press ¢.■■ To delete the last digit, press 4.6 Press the volume knob to transmit thePIN code.If “PAIRING OK” is displayed, registration iscompleted.When “CONFIRM DVC” is displayed, confirmconnection with a Bluetooth deviceoperation.7 The receiver is connected to a Bluetoothdevice, with “HF CONNECT” or “AUDCONNECT” displayed, and exits the easypairing mode.■■ If an error code is displayed during paring,see (page 37).■■ If the error message appears even thoughthe PIN code is correct, try the procedurementioned in Bluetooth device> (page 22).When a Bluetooth device has already beenregistered, or maximum of five Bluetoothdevices have already been registered(Selecting a Bluetooth device)2 “(device name)” or “DEVICE FULL” isdisplayed.3 Turn the volume knob to select aBluetooth device name.■■ To register a new Bluetooth device,select “[NEW DEVICE]”, then go to “Whenregistering a Bluetooth device for the firsttime.”4 Press the volume knob.5 Turn the volume knob to select theprofile for the device to connect.■■ “HANDSFREE”/ ”AUDIO”: The device canbe connected using either a hands-freeor audio profile.“HF/AUD”: The device is can be connectedusing both hands-free and audio profiles.6 Press the volume knob to set up theBluetooth device.■■ “✱H✱A (device name)”: The selectedBluetooth device is busy.■■ “-H-A (device name)”: The selectedBluetooth device is on standby.■■ “ H A (device name)”: The Bluetoothdevice is deselected.• “H” (HFP) or “A” (A2DP) indicates thecorresponding profile.7 Press to exit easy pairing mode.Deleting the registered Bluetooth device2 “(device name)” or “DEVICE FULL” isdisplayed.3 Turn the volume knob to select aBluetooth device name.4 Press and hold the volume knob to deletethe selected Bluetooth device.“DELETE” is displayed.5 Turn the volume knob to select “YES”,then press to confirm.“COMPLETED” is displayed.6 Press to exit easy pairing mode.Registering from Bluetooth devices(Pairing)1 Press SRC to turn on the power.2 Start registering this unit by operatingthe Bluetooth device.By operating the Bluetooth device, registerthe hands-free unit or audio unit (pairing).Select “KENWOOD BT CD/R-6P1” from thelist of found units.3 Input the PIN code (“0000”) in theBluetooth device.Check that registration is complete onthe Bluetooth device. PIN code is set to“0000” as the default. You can change thiscode. Refer to [PIN CODE EDIT] under (page 24).4 By operating the Bluetooth device, starthands-free connection.■■ If there are 5 or more Bluetooth devicesregistered, you cannot register a newBluetooth device.About the Cell-Phone■■ Version: Bluetooth Standard Ver. 3.0Certified■■ Profile:HFP (Hands Free Profile)HSP (Headset Profile)SPP (Serial Port Profile)OPP (Object Push Profile)PBAP (Phone book Access Profile)A2DP (Advanced Audio Distribution Profile)AVRCP (Audio/Video Remote ControlProfile)For the cell-phones verified for compatibility,access the following URL:www.kenwood.com/cs/ce/bt/■■ The units supporting the Bluetoothfunction have been certified for conformitywith the Bluetooth Standard following theprocedure prescribed by Bluetooth SIG.However, it may be impossible for suchunits to communicate with your cell-phone depending on its type.
