Kenwood KDC-BT49DAB Instruction Manual

ENGLISH 25REMOTE CONTSTEERING WHEELREMOTE INPUTMUTEP. CONTANT CONTPart list forinstallation(A) FaceplateWiring connectionFuse (10 A)Rear/ front/ subwoofer output(C) Mounting sleeve(B) Trim plate(D) Wiring harness(E) Extraction keyLight blue/yellow(Steering remotecontrol wire)To the steering wheelremote control adapterBlue/White(Power controlwire/ Antennacontrol wire)Brown(Mute control wire)To the power controlterminal when using theoptional power amplifieror to the antenna controlterminal in the vehicleTo connect the Kenwoodnavigation system, referyour navigations manualYellow (A4)Red (Ignition wire)Red (A7)Yellow (Battery wire)Pin Color and functionA4 Yellow : BatteryA5 Blue/White : Power controlA7 Red : Ignition (ACC)A8 Black : Earth (ground) connectionB1 Purple ] : Rear speaker (right)B2 Purple/black [B3 Gray ] : Front speaker (right)B4 Gray/black [B5 White ] : Front speaker (left)B6 White/black [B7 Green ] : Rear speaker (left)B8 Green/black [ ISO connectorsConnecting the ISO connectors on some VW/Audi orOpel (Vauxhall) automobilesYou may need to modify the wiring of the suppliedwiring harness as illustrated below.UnitVehicleA7 (Red)Ignition wire(Red)A4 (Yellow)Default wiringBattery wire(Yellow)If no connections are made, do not let the wirecome out from the tab.When connecting to an externalamplifier, connect its groundwire to the car’s chassis to avoiddamaging the unit.Antenna terminal MIC (microphone inputterminal) ( 11)DAB antenna jack ( 26)