English | 13Tuner OperationFrequency Step SettingChanging the tuning frequency step.The original setting is FM band 50 kHz, and AMband 9 kHz.1 Turn the power OFFPress the [SRC] button for at least 1 second.2 Switch the frequency stepWhile pressing the [SEARCH] and [AUTO]buttons, press the [SRC] button.Release your fingers from the button after thedisplay appears.The frequency step changes to FM band 200 kHz,and AM band 10 kHz.⁄• When the same operation is repeated, the frequencystep returns to the original setting.• When the frequency step is changed, the frequencies inthe memory are deleted.Function of remote controlDirect Access TuningEntering the frequency and tuning.1 Enter Direct Access Tuning modePress the [DIRECT] button on the remotecontrol.“– – – –” is displayed.2 Enter the frequencyPress the number buttons on the remotecontrol.Example:Desired frequency Press button92.1 MHz (FM) [0], [9], [2], [1]810 kHz (AM) [0], [8], [1], [0]Cancelling Direct Access TuningPress the [DIRECT] button on the remotecontrol.⁄• You can enter the FM band frequency in steps of aminimum of 0.1 MHz.Station Preset MemoryPutting a station in the memory.1 Select the frequency to put in the memoryPush the [AUD] knob towards right or left.2 Enter Preset Memory modePress the [SEARCH] button.3 Select the number to put in the memoryTurn the [AUD] knob or push it towards up ordown.4 Determine the number to put in the memoryPress the [AUD] knob for at least 1 second.Cancelling the Preset Memory modePress the [SEARCH] button.Preset TuningRecalling the stations in the memory.1 Enter Preset Tuning Select modePress the [SEARCH] button.2 Select a desired station in the memoryTurn the [AUD] knob or push it towards up ordown.3 Recall the stationPress the [AUD] knob.Cancelling Preset TuningPress the [SEARCH] button.Auto Memory EntryPutting stations with good reception in the memoryautomatically.1 Enter Auto Memory Entry modeSelect “AUTO MEMORY”.For how to select Function Control items, refer to (page 6).2 Open Auto Memory EntryTurn the [AUD] knob to select “YES”, and thenpress the [AUD] knob.When 6 stations that can be received are put in thememory, auto memory entry closes.