Kenwood KDC-BT7043U Instruction Manual

Also see for KDC-BT7043U: Service manual

20 | KDC-BT7043U/ KDC-MP6043UAudio AdjustmentsSpeaker SettingFine-tuning so that the System Q value is optimalwhen setting the speaker type as follows;Speaker type DisplayOFF “SP SEL OFF”For 5 & 4 in. speaker “SP SEL 5/4”For 6 & 6x9 in. speaker “SP SEL 6x9/6”For the OEM speaker “SP SEL OEM”1 Enter StandbyPress the [SRC] button.Select the “STANDBY” display.2 Enter Speaker Setting modePress the [AUD] knob.3 Select the Speaker typeTurn the [AUD] knob.4 Exit Speaker Setting modePress the [AUD] knob.Audio Preset MemoryRegistering the value setup by Sound Control. Thememory cannot be erased by the Reset button.1 Setup Sound ControlRefer to the following operations to setup theSound Control.-

2 Enter Audio Preset Memory mode (Other thanStandby mode)Select “MENU” > “AUDIO PRESET”.Press the [AUD] knob for at least 1 second.For how to select Function Control items, refer to (page 6).3 Select the Audio Preset MemoryTurn the [AUD] knob.4 Determine whether to put the Audio Preset inthe memoryPress the [AUD] knob.“MEMORY” is displayed.5 Put the Audio Preset in the memoryTurn the [AUD] knob to select “YES”, and thenpress the [AUD] knob.“COMPLETE” is displayed.Audio Preset RecallRecalling the sound setup registered by Preset Memory> (page 20).1 Select the source2 Enter Audio Preset Recall mode (Other thanStandby mode)Select “MENU” > “AUDIO PRESET”.Press the [AUD] knob for at least 1 second.For how to select Function Control items, refer to (page 6).3 Select the Audio Preset RecallTurn the [AUD] knob.Select the “RECALL” display.4 Determine whether to recall the Audio PresetPress the [AUD] knob.5 Recall the Audio PresetTurn the [AUD] knob to select “YES”, and thenpress the [AUD] knob.“COMPLETE” is displayed.6 Exit Audio Preset modePress the [SERACH] button twice.⁄• The User memory of “SYSTEM Q” in

(page 18) is changed to the value which was recalled.• The source tone memory item of

18) is changed to the value which was recalled by theselected source.6 Exit Audio Preset modePress the [SERACH] button twice.⁄• Register 1 pair of Audio Preset Memory. You cannotregister by the source.• When you press the Reset, all the sources will be thesetting value which is registered.• The following items cannot be registered.Volume, Balance, Fader, Volume offset, Dual Zone System,Rear Volume