Kenwood KDC-BT730DAB Instruction Manual

Also see for KDC-BT730DAB: Quick start guide

26 ENGLISHDISPLAY SETTINGS[DIMMER] Dims the illumination.[ON]: Dimmer is turned on.[OFF]: Dimmer is turned off.[DIMMER TIME]: Set the dimmer on and off time.1 Turn the volume knob to adjust the [ON] time, then press the knob.2 Turn the volume knob to adjust the [OFF] time, then press the knob.Default: [ON]: [18:00] ; [OFF]: [6:00][BRIGHTNESS] 1 Select a zone. (See the illustration on page 25.)2 [LVL 00] to [LVL 31]: Set the brightness level for the selected zone.[TEXT SCROLL] [ONCE]: Scrolls the display information once. ; [AUTO]: Repeats scrolling at5-second intervals. ; [OFF]: Cancels.• Not applicable to Dynamic Label display information (page 28) while inDIGITAL AUDIO source.[LEVEL METER] [ON]: Shows the level meter on the display window (as shown below). ;[OFF]: Cancels.Level meterPreset colors:[RED1]/[RED2]/[RED3]/[PURPLE1]/[PURPLE2]/[PURPLE3]/[PURPLE4]/[BLUE1]/[BLUE2]/[BLUE3]/[SKYBLUE1]/[SKYBLUE2]/[LIGHTBLUE]/[AQUA1]/[AQUA2]/[GREEN1]/[GREEN2]/[GREEN3]/[YELLOWGREEN1]/[YELLOWGREEN2]/[YELLOW]/[ORANGE1]/[ORANGE2]/[ORANGERED]REFERENCESMaintenanceCleaning the unitWipe off dirt on the faceplate with a dry silicone or soft cloth.Cleaning the connectorDetach the faceplate and clean the connector gentlywith a cotton swab. Be careful not to damage theconnector.Handling discs• Do not touch the recording surface of the disc.• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.• Do not use any accessories for the disc.• Clean from the center of the disc and move outward.• Clean the disc with a dry silicone or soft cloth. Do not use any solvents.• When removing a disc from this unit, pull it out horizontally.• Remove burrs from the center hole and disc edge before inserting a disc.More informationFor: – Latest firmware updates and latest compatible item list– KENWOOD original application– Any other latest informationVisit .General• This unit can only play the following CDs:• For detailed information and notes about the playable audio files, visit.Connector (on the reverseside of the faceplate)