Kenwood KDC-BT730DAB Instruction Manual

Also see for KDC-BT730DAB: Quick start guide

ENGLISH 33REMOTE CONTSTEERING WHEELREMOTE INPUTP. CONTANT CONTMUTEWiring connectionINSTALLATION/CONNECTIONFuse (10 A)Antenna terminalDAB antenna jack (page 6, 37)Blue/White*2(Power control wire/Antenna control wire)Light blue/yellow(Steering remote controlwire)To the power control terminal whenusing the optional power amplifier orto the antenna control terminal in thevehicleBrown(Mute control wire) To connect the Kenwood navigationsystem, refer your navigation manualIf no connections are made, do not let the wire come out from the tab.To the steering wheel remote controladapterIf your car does not have an ISO terminal:We recommend installing the unit with a commercially availablecustom wiring harness specific for your car and leave this job toprofessionals for your safety. Consult your car audio dealer.Connecting the ISO connectors on some VW/Audi or Opel(Vauxhall) automobilesYou may need to modify the wiring of the supplied wiring harness asillustrated below.UnitVehicleA7 (Red) Ignition wire (Red)A4 (Yellow)Default wiringBattery wire (Yellow)Yellow (A4)Red (Ignition wire)Red (A7)Yellow (Battery wire)ISO connectorsNOTE: Total output for Blue/White wire(*1) + (*2) is 12 V 350 mAPin Color and function (for ISO connectors)A4 Yellow : BatteryA5 Blue/White*1 : Power controlA7 Red : Ignition (ACC)A8 Black : Earth (ground) connectionB1 Purple ] : Rear speaker (right)For 3-way crossover: Tweeter (right)B2 Purple/black [B3 Gray ] : Front speaker (right)For 3-way crossover: Mid range speaker (right)B4 Gray/black [B5 White ] : Front speaker (left)For 3-way crossover: Mid range speaker (left)B6 White/black [B7 Green ] : Rear speaker (left)For 3-way crossover: Tweeter (left)B8 Green/black [