Kenwood KDC-BT73DAB Quick Start Manual

Also see for KDC-5057SD: Manual Instruction manual

Contents

16 | Quick Start GuideInstalling the Digital radio antennaInstallation overviewAntenna cable (3.5 m)Accessory45• The antenna should be installed on thepassenger side for safety.• Use cord clamper (Accessory 6) tosecure the antenna to the pillar at severallocations.• The direction of the antenna film(Accessory 4) changes depending onwhether the film antenna is installed onthe right side or left side.• Separate the antenna film (Accessory 4)from the ceramic line (black part) at thetop of the front glass by 150 mm.Also, place it about 70 mm inside theceramic line at the side end of the frontglass. (where the earth sheet of theamplifier can be pasted on the metal partof the front pillar)• Separate from other antennas by at least100 mm.• Do not paste the amplifier (Accessory 5)on the ceramic line (black part) aroundthe front glass. Because there is notenough adhesion.Determining the antennainstallation location• When installing the antenna on theleft sideAccessory5Accessory470 mm*150 mmFront pillarEarth sheet• When installing the antenna on theright sideAccessory4Accessory570 mm*150 mmFront pillarEarth sheet*Where the earth sheet of amplifier unit(Accessory 5) can be pasted on the metalpart of the front pillar.KDC-BT73DAB only