Kenwood KDC-BT73DAB Quick Start Manual

Also see for KDC-5057SD: Manual Instruction manual

Contents

8 | Quick Start GuideListening to the radio/Digital radioSelecting a tuner sourcePress [SRC] to select “TUNER” or “DIGITALRADIO” (KDC-BT73DAB only). Refer to selection> (page 5).Selecting a band (FM or AM)(Tuner only)Press [R].Selecting a station/ servicePress [E] or [F].The seek mode can be changed. Referto <9-5. Tuner setting> or <10-9. DigitalRadio setting>in Instruction manualStation preset memory1 Press [R] to select a band. (Tuner only)2 Press [E] or [F] to select thestation/ service you want to save in thestation preset memory.3 “TUNER”: Press [1/6].“DIGITAL RADIO”: Press [1/6] twice.Press [1/6] again to enter the MixStation preset mode. In this mode,different bands and tuner sources (FM,AM, Digital Radio etc.) can be savedin the same preset layer, which allowsyou to recall a desired station withoutswitching between bands and/or tunersources. Maximum of 6 stations can bepreset in the Mix Station preset mode.4 Turn [Control] knob to select presetnumber (FM/ Digital Radio: “1” – “18”,AM: “1” – “6”), and then press and hold[Control] knob.Recalling the stations in thememory1 Press [R] to select a band. (Tuner only)2 Press [1/6].3 Turn [Control] knob to select a presetnumber (FM/ Digital Radio: “1” – “18”, AM:“1” – “6”), and then press [Control] knob.In the Mix Station preset mode, bandnames of tuner sources are displayed asfollows:FM: FM broadcast stationAM: AM broadcast stationDR: Digital Radio service[SRC][1/6] [E/F][R][Control] knob