Kenwood KDC-BT8044U Instruction Manual

Contents

Kenwood KDC-BT8044U Instruction Manual Manual pdf 22 page image

22 | KDC-BT8044U/ KDC-BT8044UY/ KDC-W7544U/ KDC-W7644UY/ KDC-W7044U/ KDC-W7144UYOperation of hands-free phoningFunction of KDC-BT8044U/ KDC-BT8044UYKDC-W7544U/ KDC-W7644UY/ KDC-W7044U/ KDC-W7144UY with KCA-BT200 (Optional Accessory)Make a voice dialing call1 Enter voice recognize modeSelect “BT” > “Voice Recognize”.For how to select Function Control item, refer to (page 6).“Ready” is displayed.2 Press the Control knob.“PB Name?” is displayed.When a beep is heard, utter the name within 2second.3 “PN Type” is displayed.When a beep is heard, utter the category within 2second.4 Make a callPress the Control knob for at least 1 second.• This step is the same as step 3 of the procedure in. You can make acall or select a category.⁄• If your voice cannot be recognized, a message isdisplayed. Pressing the Control knob allows you to retryvoice input. (page 52)• Both the name and category requires registration of avoice tag. (page 38)• Audio sound is not output during voice recognize.Registering to the Preset Dial NumberList1 Enter the phone number you wish to registerEnter the phone number with reference to thefollowing:Dial a number/ Calling a number in the call log/Calling a number in the Phone Book2 Enter Preset Memory modePress the [ ] button.3 Select the number to put in the memoryTurn the Control knob or push it towards up ordown.4 Determine the number to put in the memoryPress the Control knob for at least 1 second.Exit the Preset Memory modePress the [ ] button.Display of phone number type(category)The category items in the Phone Book are displayedas follows:Display Information“GENERAL” / “ ” General“HOME” / “ ” Home“OFFICE” / “ ” Office“MOBILE” / “ ” Mobile“OTHER” / “ ” Other