|
32 | KDC-BT8044U/ KDC-BT8044UY/ KDC-W7544U/ KDC-W7644UY/ KDC-W7044U/ KDC-W7144UYSound SetupAudio Preset RecallRecalling the sound setup registered by Preset Memory> (page 32).1 Select the sourcePress the [SRC] button.2 Enter Audio preset recall modeSelect “SOUND” > “Preset” > “Recall”.For how to select Function Control items, refer to (page 6).3 Select the number to recall in the memoryTurn the Control knob and push the centerwhen the desired number is displayed.4 Turn the Control knob to select “YES”, and thenpress the Control knob.“Recall Completed” is displayed.5 Exit Audio preset recall modePress the [FNC] button.⁄• The “User” of (page 30) ischanged to the value which was recalled.• The Equalizer curve is changed to the value which wasrecalled by the selected source.Audio Preset MemoryRegistering the value setup by Sound Control.1 Setup Sound ControlRefer to the following operations to setup theSound Control.- Cabin selection (page 28)- Speaker Setting (page 28)- DTA (Digital Time Alignment) setting (page 29)- X’Over setting (page 29)- Manual Equalizer Control (page 30)- Preset position selection (page 31)- Manual position setting (page 31)2 Enter Audio preset memory modeSelect “SOUND” > “Preset” > “Memory”.For how to select Function Control items, refer to (page 6).3 Select the number to put in the memoryTurn the Control knob and push the centerwhen the desired number is displayed.4 Turn the Control knob to select “YES”, and thenpress the Control knob.“Memory Completed” is displayed.5 Exit Audio preset memory modePress the [FNC] button.⁄• Register 6 pairs of Audio Preset Memory.• Number “1”: When you press the Reset, all the sourceswill be the setting value which is registered.• Number “1” and “2”:The memory cannot be erased by the Reset button.• This function cannot be registered when the iPodEqualizer set in (page 30).
|
