|
14 | KDC-BT838UOperation of hands-free phoningBefore Use• For details on the Bluetooth cell-phone with thehands-free function, see (page 33).• You need to register your cell-phone before usingit with this unit. For more details, see Bluetooth device> (page 23).• If you have registered two or more cell-phones,you need to select one of them. For more details,see Connect> (page 25).• To use the Phone Book, it must be downloaded tothis unit in advance. For details, see the Phone Book> (page 24).• “BT” indicator is lit when a cell-phone is connectedto this unit.Receiving a callAnswering a Phone CallPress the [AUD] knob.⁄• The following operations disconnect the line:- Insert a CD.- Connect a USB device.• The name of the calling party is displayed if it has alreadybeen registered in the Phone Book.Rejecting an Incoming CallPress the [ATT] button for at least 1 second.During a callDisconnecting a CallPress the [SRC] button.Switching to the Private ModePress the Control knob.Switches between Private talk (“PRVT”) and Hands-free talk each time this knob is pressed.⁄• Depending on the type of your cell-phone, switchingto the private talk mode may select the source that wasused before commencing the hands-free connection.If this happens, the source cannot be switched back tothe hands-free talk mode by operating this unit. Operateyour cell-phone to return to the hands-free talk mode.Adjusting the Voice Volume during a CallTurn the [AUD] knob.Call waitingAnswering Another Incoming Call with theCurrent Call Suspended1 Press the [AUD] knob.2 Turn the Control knob or push it towards upor down. Select the “Answer” display.3 Press the [AUD] knob.Answering another Incoming Call afterTerminating the Current CallPress the [SRC] button.Continuing the Current Call1 Press the [AUD] knob.2 Turn the Control knob or push it towards upor down. Select the “Reject” display.3 Press the [AUD] knob.Answering the Waiting Call after Terminatingthe Current CallPress the [ATT] button for at least 1 second.Switching between the Current Call and WaitingCallPress the [AUD] knob.Each pressing of this knob switches the callingparty.Other functionsClearing the Disconnection MessagePress the [ATT] button for at least 1 second.“HF Disconnect” disappears.Switching between Display ModesPress the [AUTO] button.The number of items displayed is switchedbetween 1 or 3 each time this knob is pressed.
|
