English | 25Selecting the Bluetooth device YouWish to ConnectWhen two or more Bluetooth devices have alreadybeen registered, you need to select the Bluetoothdevice you wish to use.1 Select Bluetooth device selection item duringMenu modeCell-phone(In Standby mode)“Phone Selection” is displayed.Audio player“Audio Selection” is displayed.For how to select Function Control items, refer to (page 6).2 Enter Bluetooth device selection modePress the Control knob for at least 1 second.'(name)' is displayed.3 Select the Bluetooth deviceTurn the Control knob or push it towards up ordown.4 Set up the Bluetooth devicePush the Control knob towards right or left.'✱(name)' or '-(name)' is displayed."✱": The selected Bluetooth device is busy."-": The selected Bluetooth device is on standby." " (blank): The Bluetooth device is deselected.5 Exit the Bluetooth device selection modePress the [FNC] button.⁄• If a cell-phone is already selected, deselect it, and thenselect a different one.• If you cannot select a device using the audio player,connect the device with the audio player.Deleting a Registered BluetoothdeviceYou can delete a registered Bluetooth device.1 Select Bluetooth device deletion item duringMenu mode (In Standby mode)“Device Delete” is displayed.For how to select Function Control items, refer to (page 6).2 Enter Bluetooth device deletion modePress the Control knob for at least 1 second.'(name)' is displayed.3 Select the Bluetooth deviceTurn the Control knob or push it towards up ordown.4 Delete the selected Bluetooth devicePress the Control knob.Turn the Control knob to select “YES”, and thenpress the Control knob.5 Exit the Bluetooth device deletion modePress the [FNC] button.⁄• When a registered cell-phone is deleted, its Phone Book,log, SMS, and voice tag are also deleted.Displaying the Firmware VersionDisplay the version of the firmware of this unit.1 Select Bluetooth Firmware update item duringMenu mode (In Standby mode)“BT F/W Update” is displayed.For how to select Function Control items, refer to (page 6).2 Enter Bluetooth Firmware update modePress the Control knob for at least 1 second.The firmware version appears.3 Exit Bluetooth Firmware update modePress the [FNC] button.⁄• For how to update the firmware, access our website.http://www.kenwood.com/bt/information/
