Kenwood KDC-BT838U Instruction Manual

Also see for KDC-BT838U - Radio / CD: Training guide Instruction manual Service manual

Kenwood KDC-BT838U Instruction Manual Manual pdf 36 page image

MICP.CONTILLUMIANT.CONTMUTEREMO.CONTL RAUX36 | KDC-BT838UConnecting Wires to TerminalsBatteryGround wire (Black) - (To car chassis)FM/AM antenna inputFuse (10A)Wiring harness(Accessory1)Ignition wire (Red)Battery wire (Yellow)ACCCar fuse boxIf no connections are made, do not let the wire come out from the tab.To front left speakerTo front right speakerTo rear left speakerTo rear right speakerWhite/BlackWhiteGray/BlackGrayGreen/BlackGreenPurple/BlackPurpleIgnition key switchCar fuse box(Main fuse)To Kenwood disc changer/ External optional accessory⁄ To connect these leads, refer to the relevant instruction manuals.Motor antenna control wire (Blue)Mute wire (Brown) To connect the Kenwood navigation system, consult your navigationmanual.Power control/Motor antenna control wire(Blue/White) Connect either to the power control terminal when using the optionalpower amplifier, or to the antenna control terminal in the vehicle.Dimmer control wire (Orange / White) To car light control switchDepending on what antenna you are using, connect either to the controlterminal of the motor antenna, or to the power terminal for the boosteramplifier of the film-type antenna.To use the steering wheelremote control feature, youneed to an exclusive remoteadapter (not supplied) matchesyour car is required.Steering remote control(Light Blue/Yellow)AUX input (Stereo)Use the mini-plug which is stereo type and does nothave any resistance.Front outputSub Woofer outputRear outputUSB connector (1m)To USB device⁄Do not remove the cap whenyou do not use the USB cable.The connector will cause theunit to malfunction if it gets intouch with any metallic part ofthe vehicle.Microphone Unit(Accessory 3) (3 m, 9.5 ft)