Kenwood KDC-C510FM Instruction Manual

Also see for KDC-C510FM: Instruction manual

Kenwood KDC-C510FM Instruction Manual Manual pdf 19 page image

19Changing the transmission frequency1 To set the frequency changemodeHold down the REP button on thedisplay unit for more than threeseconds.The FREQ indicator will light up andthe currently set frequency will bedisplayed.• The initial value is 88.3MHz.• If this function is on, the functionsother than power on / off, reset,and modulation level / dynamiccontrol, cannot be operated.• This function is not available whenthe random play, repeat play, orscan play function is on. Beforeusing this function, cancel the otherfunctions. This function cannot beused while loading a disc (while theplay indicator is blinking).2 To change the frequencyPress the 4 or 3 button on thedisplay unit.The transmission frequency willchange as follows:87.7MHz 89.9MHz87.9MHz 89.7MHz88.1MHz 89.5MHz88.3MHz (initial value) 89.3MHz88.5MHz 89.1MHz88.7MHz 88.9MHzSome car radios cannot receive a87.7 MHz frequency.To cancelHold down the REP button on thedisplay unit for more than threeseconds.The FREQ indicator will go off and thefrequency change will take effect.The frequency change mode isautomatically cancelled if you donothing for 15 seconds.C D A U T O C H A N G E R C O N T R O L L E RREPRDM3- +4 ¢PWR' M . R D M D . R E PT R A C K D I S C8/D . S C N M H zDISCT R A C K1234NOTENOTEF R E QM H zInstallation