Kenwood KDC-MP345U Instruction Manual

Also see for KDC-MP245U: Service manual Instruction manual

4 | KDC-MP345U/ KDC-MP245UBasic OperationsBefore UsingExit of the Demonstration ModeTurn off the demonstration mode when you use itfor the first time after installation.1 Press the [VOL] knob to quit the demonstrationmode when the messages “CANCEL DEMO”,“PRESS”, “VOLUME KNOB” are displayed (approx.15 seconds).2 Select “YES” and press the [VOL] knob.When “NO” is selected, turn the [VOL] knob.⁄• Demonstration mode can also be cancelled in “DEMOMODE” of (page 8).Adjusting the Clock1 Press the [DISP] button several times until clockdisplay (“CLOCK”) appears.2 Keep pressing the [DISP] button until the hourdisplay blinks.3 Turn the [VOL] knob to adjust the hour.4 Press the [VOL] knob to finish the hour adjusting.The minute display blinks.5 Turn the [VOL] knob to adjust the minute.6 Press the [VOL] knob to finish the minuteadjusting.Common OperationPower and source selectTurns the power ON by pressing the [SRC]button.When power is ON, pressing the [SRC] buttonswitches among playable sources in the followingorder:Tuner (“TUNER”) ➜ USB (“USB”) or iPod (“iPod”)➜ CD (“CD”) ➜ Auxiliary Input (“AUX”) ➜ Standby(“STANDBY”) ➜ Tuner (“TUNER”)Keeping pressing the [SRC] button for at least 1second turns the power OFF.⁄• The source “iPod” and “CD” can be selected when eachsource is ready to play.VolumeTurning the [VOL] knob adjusts the soundvolume.Clock display and Display scrollPressing the [DISP] button selects the displaymode.Refer to (page 7).Keeping pressing the [DISP] button scrolls thedisplay.Auxiliary inputPortable audio device can be connected with thestereo mini-plug (3.5 mm ø).[BAND] [VOL] [1][2] [3][4] [5][6][] [D][ ][DISP][SRC][ ][ ]ReleaseAuxiliary inputUSB TerminalDisc slot