Kenwood KDC-MP425 Instruction Manual

Also see for KDC-MP425: Service manual Service manual Instruction manual

Kenwood KDC-MP425 Instruction Manual Manual pdf 12 page image

12 | EnglishGeneral featuresSwitching DisplaySwitching the information displayed.Press the [DISP] button.Each time the button is pressed the displayswitches as shown below.In Tuner sourceInformation DisplayStation name or Frequency "SNPS"Frequency "BAND+FREQ"ClockIn CD & External disc sourceInformation DisplayDisc title "D-TITLE"Track title "T-TITLE"Track number & Play time "P-Time"Disc name "DNPS"ClockIn MP3/WMA sourceInformation DisplaySong title & Artist name "TITLE"Album name & Artist name "ALBUM"Folder name "FOLDER NAME"File name "FILE NAME"Track number & Play time "P-Time"ClockIn HD Radio sourceInformation DisplayStation name "Station Name"Song title/ Artist name/Album name/ Genre"Title"Frequency "Frequency"ClockIn Auxiliary input sourceInformationAuxiliary input nameClock• If the Disc title, Track title, Song title & Artist name, orAlbum name & Artist name is selected when the discwhich does not have Disc title, Track title, Song title,Album name, or Artist name is played, track numberand play time are displayed.Station/Disc Naming (SNPS/DNPS)Attaching a title to a Station or CD.1 Receive/play the station/disc you want toattach a title to• A title can’t be attached to an MD.• Refer to the 'Switching Display' (page 12) and selecteither "DNPS" or "SNPS". No name can be attached tothe source if "DNPS" or "SNPS" cannot be selected forit.2 Enter name set modePress the [NAME.S] button for at least 2seconds."NAME SET" is displayed.3 Move the cursor to the enter characterpositionPress the [4] or [¢] button.4 Select the character typePress the [38] button.Each time the button is pressed the charactertype switches as shown below.Character typeAlphabet upper caseAlphabet lower caseNumbers and symbolsSpecial characters (Accent characters)5 Select the charactersPress the [FM] or [AM] button.• Characters can be entered by using a remote with anumber buttons.Example: If "DANCE" is entered.Character Button Times pressed"D" [3] 1"A" [2] 1"N" [6] 2"C" [2] 3"E" [3] 26 Repeat steps 3 through 5 and enter the name.7 Exit name set modePress the [NAME.S] button.• When operation stops for 10 seconds the name at