Kenwood KDC-MP425 Instruction Manual

Also see for KDC-MP425: Service manual Service manual Instruction manual

Kenwood KDC-MP425 Instruction Manual Manual pdf 18 page image

18 | EnglishCD/MP3/WMA/External disc control featuresPlaying CD & MP3/WMAWhen there is no disc inserted1 Drop open the faceplatePress the Release button.2 Insert a disc.3 Press the faceplate on the left side, andreturn it to its former position.• When the faceplate has been dropped open, it mightinterfere with the shift lever or something else. If thishappens, pay attention to safety and move the shiftlever or take an appropriate action, then operate theunit.• Do not use the unit with the faceplate in the opencondition. If it’s used in the open position dust canenter the inside part and cause damage.• When a disc is inserted, the "IN" indicator is ON.When a disc is insertedPress the [SRC] button.Select the "CD" display.Pause and playPress the [38] button.Each time the button is pressed it pauses andplays.Eject the disc1 Drop open the faceplatePress the Release button.2 Eject the discPress the [0] button.3 Press the faceplate on the left side, andreturn it to its former position.• 3 in. (8cm) disc can’t be played. Using an adapter andinserting them into this unit can cause damage.• The MP3/WMA media that this unit can play are CD-ROM, CD-R, and CD-RW.The medium formats must be ISO 9660 Level 1, Level2, Joliet, or Romeo. The methods and precautions tobe followed for writing MP3/WMA data are covered in'Notes on playing MP3/WMA' (page 8).Check that section before creating your MP3/WMAmedia.Fast Forwarding and ReversingFast ForwardingHold down on the [¢] button.Release your finger to play the disc at that point.ReversingHold down on the [4] button.Release your finger to play the disc at that point.Track/File SearchSearching for a song on the disc or in the MP3/WMA folder.Press the [4] or [¢] button.Function of disc changer/ MP3/ WMADisc Search/Folder SearchSelecting the disc set in the Disc changer or thefolder recorded on the MP3/WMA media.Press the [DISC–] or [DISC+] button.Function of remoteDirect Track/File SearchDoing Track/File Search by entering the track/filenumber.1 Enter the track/file numberPress the number buttons on the remote.