Kenwood KDC-MP425 Instruction Manual

Also see for KDC-MP425: Service manual Service manual Instruction manual

Kenwood KDC-MP425 Instruction Manual Manual pdf 16 page image

16 | EnglishTuner featuresFunction of remoteDirect Access TuningEntering the frequency and tuning.1 Select the bandPress the [FM] or [AM] button.2 Enter Direct Access Tuning modePress the [DIRECT] button on the remote."– – – –" is displayed.3 Enter the frequencyPress the number buttons on the remote.Example:Desired frequency Press button92.1 MHz (FM) [0], [9], [2], [1]810 kHz (AM) [0], [8], [1], [0]Canceling Direct Access TuningPress the [DIRECT] button on the remote.Station Preset MemoryPutting the station in the memory.1 Select the bandPress the [FM] or [AM] button.2 Select the frequency to put in the memoryPress the [4] or [¢] button.3 Put the frequency in the memoryPress the desired [1] — [6] button for at least2 seconds.The preset number display blinks 1 time.On each band, 1 station can be put in thememory on each [1] — [6] button.Auto Memory EntryPutting stations with good reception in thememory automatically.1 Select the band for Auto Memory EntryPress the [FM] or [AM] button.2 Open Auto Memory EntryPress the [AME] button for at least 2 seconds.When 6 stations that can be received are put inthe memory Auto Memory Entry closes.Preset TuningCalling up the stations in the memory.1 Select the bandPress the [FM] or [AM] button.2 Call up the stationPress the desired [1] — [6] button.