Kenwood KDC-MP5029 Instruction Manual

Also see for KDC-MP5029: Service manual Service manual

10 | EnglishGeneral featuresSwitching DisplaySwitching the information displayed.1 Enter Switching Display modePress the Control knob for at least 1 second."DISP SEL" is displayed.2 Select the Display itemPush the Control knob to [4] or [¢].In Tuner sourceInformation DisplayFrequency "FREQ"Clock "CLOCK"In CD & External disc sourceInformation DisplayDisc title* "D-TITLE"Track title* "T-TITLE"Track number & Play time "P-TIME"Clock "CLOCK"In Audio file sourceInformation DisplaySong title & Artist name* "TITLE"Album name & Artist name* "ALBUM"Folder name "FOLDER"File name "FILE"Track number & Play time "P-TIME"Clock "CLOCK"In Auxiliary input sourceInformation DisplayAuxiliary input name "SRC NAME"Clock "CLOCK"3 Exit Switching Display modePress the Control knob.• When LX-AMP is connected, the item setup by theDisplay mode of LX-AMP is displayed.(KDC-MP6029only)• * If the contents of the information cannot bedisplayed, Playtime is displayed.• When the clock display is selected, the display settingof each source will be switched to the clock display.(KDC-MP5029 only)• Album name cannot be displayed in WMA file.• Song title, Artist name, and Album name cannot bedisplayed in AAC file.Function of the KDC-MP5029Dimmer ControlYou can change the unit's display to dimmer.Press the [DIM] button for at least 1 second.Each time the button is pressed for 1 second, theDimmer contol turns ON and OFF.When it’s ON, "DIM ON" is displayed.Theft Deterrent FaceplateThe faceplate of the unit can be detached andtaken with you, helping to deter theft.Removing the Faceplate1 Press the Release button.Drop open the faceplate.2 Drawing the faceplate to left side pull it tothe front and remove it.• The faceplate is a precision piece of equipment andcan be damaged by shocks or jolts. For that reason,keep the faceplate in its special storage case whiledetached.• Do not expose the faceplate or its storage case todirect sunlight or excessive heat or humidity. Alsoavoid places with too much dust or the possibility ofwater splashing.Reattaching the Faceplate1 Align the shaft on the unit with thedepression on the faceplate.