Kenwood KDC-MP5029 Instruction Manual

Also see for KDC-MP5029: Service manual Service manual

English | 9Adjustment Item Display RangeFront High PassFilter *2"HPF" Through/80/100/120/150/180 HzRear High PassFilter *2"HPR" Through/80/100/120/150/180 HzLow Pass Filter*1* 2 "LPF" 60/80/120/Through HzSubwoofer Phase* 1*2 "PHAS" Reverse (180°) / Normal (0°)Volume offset "V-OFF" –8 — ±0Loudness "LOUD" ON/OFF• Volume offset: Each source’s volume can be set as adifference from the basic volume.• Loudness: Compensating for low and high tonesduring low volume.• *1 You can control this item when Output> (page 9) is set to "SW ON".• *2 Function of the KDC-MP60295 Exit Audio Setup modePress [VOL] knob for at least 1 second.Speaker SettingFine-tuning so that the System Q value is optimalwhen setting the speaker type.1 Enter StandbyPress the [SRC] button.Select the "STANDBY" display.2 Enter Speaker Setting modePress the [VOL] knob.3 Select the Speaker typeTurn the [VOL] knob.Each time the knob is turned, the settingswitches as shown below.Speaker type DisplayOFF "SP OFF"For 5 & 4 in. speaker "SP 5/4"For 6 & 6x9 in. speaker "SP 6*9/6"For the OEM speaker "SP OEM"4 Exit Speaker Setting modePress the [VOL] knob.Function of the KDC-MP6029Subwoofer OutputTurning the Subwoofer output ON or OFF.Hold down on [AM] of the Control knob for atleast 1 second.Each time the button is pressed, Subwooferoutput switches ON and OFF.When it’s ON, "SW ON" is displayed.