Kenwood KDC-MP5029 Instruction Manual

Also see for KDC-MP5029: Service manual Service manual

English | 13Example:Desired frequency Press button92.1 MHz (FM) [0], [9], [2], [1]810 kHz (AM) [0], [8], [1], [0]Canceling Direct Access TuningPress the [DIRECT] button on the remote.Station Preset MemoryPutting the station in the memory.1 Select the bandPush the Control knob to [FM] or [AM].2 Select the frequency to put in the memoryPush the Control knob to [4] or [¢].3 Put the frequency in the memoryPress the desired [1] — [6] button for at least2 seconds.The preset number display blinks 1 time.On each band, 1 station can be put in thememory on each [1] — [6] button.Auto Memory EntryPutting stations with good reception in thememory automatically.1 Select the band for Auto Memory EntryPush the Control knob to [FM] or [AM].2 Open Auto Memory EntryPress the [AME] button for at least 2 seconds.When 6 stations that can be received are put inthe memory Auto Memory Entry closes.Preset TuningCalling up the stations in the memory.1 Select the bandPush the Control knob to [FM] or [AM].2 Call up the stationPress the desired [1] — [6] button.Frequency Step SettingChanging the tuning frequency step.The original setting is FM band 50 kHz, and AMband 9 kHz.1 Turn the power OFFPress the [SRC] button for at least 1 second.2 Switch the frequency stepWhile pressing the [1] and [5] button, pressthe [SRC] button.Release your fingers from the button after thedisplay is appeared.The frequency step changes to FM band 200 kHz,and AM band 10 kHz.• When the same operation is repeated, it returns to theoriginal setting.• When the frequency step is switched, the frequenciesin the memory are deleted.Function of the KDC-MP6029Function of LX BUS TelevisionTV TuningThe TV channel of a connected LX BUS Television(optional accessory) can be selected.The action depends on the setting of theconnected LX BUS Television. Refer to the userinstruction of the LX BUS Television for details.1 Select TV sourcePress the [SRC] button.Select the "TV" display.2 Select the TV band and Video inputPress the [FM] button.Each time the [FM] button is pressed, TV bandsand Video input switch.3 Select the TV channelPush the Control knob to [4] or [¢].