Kenwood KDC-PS9060R Instruction Manual

Also see for KDC-7060R: Instruction manual

Contents

Kenwood KDC-PS9060R Instruction Manual Manual pdf 13 page image

— 13 —With the local seek function turned on, auto seek tuning skipsstations with relatively poor reception.Turning Local Seek Function On/Off:Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Press the ¢ button repeatedly until the local seek functionappears in the display.Press the 4 button to search in the other direction.The function setting is indicated by "LOCAL.S ON" or "LOCAL.SOFF" in the display, indicating that the local seek function is onor off, respectively.Switching settingsPress either the AM button or FM button.The display and setting will change.Press the MENU button to end the menu mode.4321Local Seek FunctionWhen poor stereo reception is experienced, this function willreduce noise and improve listening conditions.Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Press the ¢ button repeatedly until the monaural receptionfunction appears in the display.Press the 4 button to search in the other direction.The function setting is indicated by "MONO ON" or "MONOOFF" in the display, indicating that monaural reception is on oroff, respectively.Switching settingsPress either the AM button or FM button.The display and setting will change.Press the MENU button to end the menu mode.4321Monaural ReceptionSwitching Display for Tuner (non-RDS station)Switching the Display:Each time you press the DISP button, the display switchesbetween the frequency and clock.• When the switching clock display (P.31) is set to off, the displaywill not switch to the clock display.• The £ indicator lights whilst the clock is displayed.NOTEFunction of the KDC-8060R/7060RStation Preset MemoryStore the frequency of the station currently being listened to.You can then recall that station with a single touch of abutton.Select the band/ station that you want to have stored.Hold down the button (#1-6) that you want to use for thestation, for two seconds or more.The button number blinks once in the display to indicate thatthe data has been stored.Recalling a Preset Station:Press the preset station button (#1-6) for the desired station.The number of the recalled station is displayed.You can store 6 stations in each of the FM1, FM2, FM3, and AM(MW and LW) bands.NOTE21