Kenwood KDC-PS9060R Instruction Manual

Also see for KDC-7060R: Instruction manual

Contents

Kenwood KDC-PS9060R Instruction Manual Manual pdf 27 page image

— 27 —Direct Disc SearchUsing the remote control, make direct input of the discnumber that you want to listen to.Using the numeric buttons on the remote control, enter thenumber of the disc that you want to listen to.The selected disc number blinks in the display for 10 seconds.If you make no further input in the 10-second period, thenumber entry mode will automatically be cancelled.• Input "0" to select disc #10.• If you enter more than two numbers all at once, a search will bemade only of the last number entered.Press either the DISC + or DISC – button whilst the numberinputted is blinking.The disc specified in step 1 starts playing.Cancelling Direct Disc Search During Its Operation:Press the 38 button.2NOTE1Disc Name Preset Play (DNPP)If you have preset the name of a disc that you want to listento in the disc changer, you can look for it by name and startplaying it.Press the DNPP button on the remote control."DNP PLAY" will appear in the display, and the disc namepreset play mode is entered.1Function of disc changers with remote control havingnumber/letter entry buttons (See page 8)Function of remote control with DNPP button (See page 8)The preset names/disc titles of the disc in the disc changer towhich you are currently listening are successively displayed forfive seconds each.In any of the units that are connected, discs that have not beendisc name preset will display "NO NAME".• This function can only be used in disc changers that weremanufactured or sold as of 1997. Also note that some unitscannot provide a display unless the disc name preset has beenmade by the unit that is playing.• Discs in the disc changer that have never been played beforewill appear as "NO ACCESS" when the disc names aredisplayed. When you cannot identify a disc because of the "NOACCESS" display after inserting a disc magazine, try playing itusing the disc scan or a similar function to display the discname.Also note that "NO DISC" will be displayed when a disc has notbeen loaded.Rapid display (forward / reverse):Press the DISC + or DISC – button.Pressing the DISC + button will rapidly display the presetnames/disc titles in order.Pressing the DISC – button will rapidly display the presetnames/disc titles in reverse order.When the name appears for the disc you want to playPress the OK button.The disc whose name is displayed will be recalled, and the discname preset play (DNPP) mode will end.To cancel DNPP mode:Press the DNPP button.The disc name preset play (DNPP) mode will be cancelled.2NOTE