Kenwood KDC-PS9070R Instruction Manual

Kenwood KDC-PS9070R Instruction Manual Manual pdf 30 page image

Shut down the audio system temporarily whenever anincoming call is received.The function will not work if a cable is not connected to the carNOTETEL MuteThe display dims when the car's lights are turned on.The dimmer function is not available for units if the dimmer cableis not connected.NOTEAutomatic Dimmer FunctionYou can dim the display.The dimmer function is not available for units if the dimmer cableis not connected.Turning Dimmer On/Off:Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Press the ¢ button repeatedly until the Dimmer functionappears in the display.Press the 4 button to search in the other direction.The function setting is indicated by "Dimmer ON" or "DimmerOFF" in the display, indicated that the current dimmer setting ison or off, respectively.Switching settingsPress either the AM or FM button.The display and setting will change.Press the MENU button to end the menu mode.4321NOTEDimmerWhen the KENWOOD Navigation System is connected, aninterruption of the audio guide results in the temporarylowering of the audio level.The Navigation mute function cannot be used unless a TEL mutecable is connected to the KENWOOD Navigation System.NOTENavigation Mute FunctionSwitch the preout between the rear and non-fading. When youswitch to non-fading, you can adjust the volume separately. Thefactory default is rear preout.Switching the preout: (KDC-8070R/8070W only)Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Press the ¢ button repeatedly until the Switching preoutfunction appears in the display.Press the 4 button to search in the other direction.The function setting is indicated by "SWPRE Rear" or "SWPREN-Fad" in the display, indicating that the current preout is rear ornon-fading, respectively."SWPRE Rear" (Rear preout)"SWPRE N-Fad" (Non-fading preout)Switching settingsPress either the AM or FM button.The display and setting will change.Press the MENU button to end the menu mode.You cannot use the high-pass filter with non-fading preout.Turning non-fading output On/Off :Hold down the NF button for one second or more to set thefunction ON or OFF."NF ON" is displayed when the non-fading output is set ON.NOTE4321Switching preoutOther features— 30 —EnglishFunction of the KDC-PS9070R / KDC-8070R / KDC-8070W