Kenwood KDC-PS9070R Instruction Manual

Kenwood KDC-PS9070R Instruction Manual Manual pdf 32 page image

Turning Automatic Time Adjustment On/Off:Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Press the ¢ button repeatedly until the Automatic TimeAdjustment function appears in the display.Press the 4 button to search in the other direction.The function setting is indicated by "SYNC ON" or "SYNC OFF"in the display, indicating that the Automatic Time Adjustment ison or off, respectively."SYNC ON" (Automatic time adjustment)"SYNC OFF" (Manual time adjustment)Switching settingsPress either the AM button or FM button.The display and setting will change.Press the MENU button to end the menu mode.Adjusting Time Manually:Turn off the Automatic Time Adjustment as mentioned above.Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Press the ¢ button repeatedly until the "Clock Adj / ClockAdjust" appears in the display.Press the 4 button to search in the other direction.Hold down either the AM or FM button for two seconds ormore to enter the Time Adjustment mode.The time display will blink.• Adjusting the hoursPress the FM button to advance the hours, or press the AMbutton to make the hours go back.• Adjusting the minutesPress the ¢ button to advance the minutes, or press the4 button to make the minutes go back.Press the MENU button to end the menu mode.6543214321With automatic time adjustment, you can set the clock timeautomatically according to time data sent from RDS stations(after receiving RDS signals for several minutes). You can alsoset the time manually if the automatic time adjustment functionis turned off. The factory default is automatic time adjustment.Adjusting Time Automatically:Tune into an RDS station for 3 or 4 minutes.The time adjusts automatically to the correct local time.The time is not adjusted when the RDS station you are tuned to isnot transmitting a time signal. Choose another RDS station insuch a case.NOTEAdjusting TimeFunction of the KDC-8070R/KDC-8070W/KDC-7070RThis adjustment permits easy viewing of the display.To adjust the contrast:Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Press the ¢ button repeatedly until the Contrast Adjustmentfunction appears in the display.Press the 4 button to search in the other direction.The function setting is indicated by "Contrast ##" in the display,indicating that the Contrast Adjustment mode is on.Switching settingsPress either the AM or FM button.Press the FM button to change the setting values higher, andpress the AM button to change them lower. Settings may bemade from 0 to 10.Press the MENU button to end the menu mode.The "##" display in the contrast adjustment mode will differdepending on the setting. The initial setting value is "5".NOTE4321Contrast AdjustmentOther features— 32 —English