Kenwood KDC-PS9070R Instruction Manual

Kenwood KDC-PS9070R Instruction Manual Manual pdf 34 page image

By sliding the Manual Open Switch during forced closing, youcan open the control panel. Follow the directions below topreset the number of times that this switch needs to be slid inorder to open the panel.To preset the number of times to slide the Manual Open Switch:Press the MENU button for at least one second."MENU" is displayed and the menu mode is turned on.Press the ¢ button repeatedly until the Manual Open SwitchSetting function appears in the display. Press the 4 button tosearch in the other direction.The function setting is indicated by "Open SW # / OPEN SW #"in the display, indicating that the Manual Open Switch Settingmode is on.Switching settingsPress either the AM or FM button.321Manual Open Switch SettingPress the ¡ (EJECT) button to make the faceplate slide open,and then adjust the faceplate angle using the angle adjustmentswitch.Adjustment may be made from 0 to 2.• Firmly slide the switch until it clicks.• Do not apply excessive force to the faceplate under settings 1or 2.NOTE0 1 20 1 2021You can adjust the faceplate angle for easy viewing.Adjusting faceplate angle:Faceplate Angle AdjustmentFunction of the KDC-PS9070RThe following operation allows separate sound sources tocontrol the output of the front and rear speakers. The Dual zonesystem can only be switched on or off when the source is set tothe AUX mode.Turning the Dual zone system On/Off:Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Press the ¢ button repeatedly until the Dual zone systemfunction appears in the display.Press the 4 button to search in the other direction.The function setting is indicated by "Zone 2 ON" or "Zone 2OFF" in the display, indicating that the Dual zone systemfunction is on or off, respectively.Switching settingsPress either the AM or FM button.The display and setting will change.Press the MENU button to end the menu mode.• You must purchase the optional KCA-S210A/CA-C1AX/KDC-CPS82/KDC-CX82 device before you can use this function.• You can choose to send the AUX input through the rear channel,and the unit’s tuner or CD source through the front channel.• The Bass, Treble and Loudness adjustments do not affect therear channel.• When the Dual zone system is turned on, the External disccontrol features cannot be used.• When you set the Dual zone system to on whilst the non-fadingpreout is switched on, the sound of the non-fading preout doesnot be outputted.NOTE4321Dual Zone SystemOther features— 34 —English